Woofer : 6.5", woven kevlar cone, 1" voice coil, 22 oz magnet, bumped back plate, vented pole piece
Tweeter : 1" titanium dome, ferro-fluid cooled, 30 degree swivel and pivot, neodymium magnet
X-over : FR4 board with18dB per octave crossover for tweeter and woofer sections
   +/- 3dB attenuation switches on woofer and tweeter
   4ohm/8ohm switchable on PCB
   Polyimide switch-auto protect reset switch, over power protection for tweeter
   16AWG wire connection to woofer section
   Gold plated terminal posts will accept 14AWG wire
Frequency response : 45Hz-22KHz
Sensitivity : 88dB 1W/1M
Recommended amplifier power : 10-125 watts
Impedance : 4ohm/8ohm selectable on PCB
Cutout size : 7.95"
depth : 4.00"
Weight (pair pack) : 12 lbs
Carton dimensions (pair pack) : 10.7"(H) X 10.4"(W) X 15"(L)
Paint mask and cut out template included